Sig Sauer

ROMEO-M17 Sight

The M17 and M18 pistols have been selected by the US Military as the official sidearm and the ROMEO-M17 is the only optic that is truly designed specifically for this pistol. All other optics have many disadvantages and make several compromises. The ROMEO-M17 does not. This is an American-built MIL-SPEC red dot truly worthy of the SIG SAUER name.

*Please Note - The ROMEO-M17 pistol red dot sight utilizes SIG SAUER S proprietary SIG-LOC mounting interface and only fits SIG SAUER M17/M18 military issue and commemorative issue pistols with a single optics plate mounting screw. This sight will not fit any other pistols.

Description:

• A fully enclosed sealed and purged optical system for ultimate protection from the elements
• Mounts from underneath the pistol slide re-using the MHS pistol rear sight block and sight block screw
• 7075 Aluminum housing
• Integrated gas deflector on the front of the housing
• Machined anti-reflection grooves on all rear surfaces for reduced glare
• Extremely low deck height allowing a full sight picture and co-witness with standard-height sights
• SIG-LOC (SIG Leverage Optimizing Connection) proprietary mounting interface for the ultimate optic/pistol lockup.
• A high-efficiency point source LED emitter with 2 MOA dot/32 MOA circle reticle. The reticles are independently selectable (circle only dot only or circle/dot combination).
• Independent brightness adjustment buttons that are recessed within a protective plate which can be activated even with gloves on. Buttons have bump features above UP and below DOWN so they can be determined by feel.
• 15 brightness settings with 3 of the settings optimized for use with Gen 3+ NV devices
• A side-mounted CR2032 battery compartment with a threaded battery cap for easy battery changes without the need to remove the optic from the firearm. The cap is slotted and knurled for use with or without tools.
• Minimum continuous runtime of 20000 hours at medium brightness setting
• 2 drainage holes machined in the sides of the housing just behind the rear sealed window to allow pooled liquid to escape when the optic goes from a vertical position (such as in a holster) to a horizontal position (such as shooting)
• Windage and elevation adjustments have tactile clicks. Adjustment screws are slotted for use with any small flat-blade tool. Adjustment resolution is 1.5 MOA per click.
• MOTAC (Motion Activated Illumination)
• MAGNETAC (Magnetic Activation)
• D.A.R.C. (Dark Adaptive Reticles & Coatings)
• Designed developed tested and fully assembled in the USA

Specifications:

• RX FootprintSIG-LOC (M17/M18 MHS & Commem.)
• ColorCoyote Tan
• Height1.1 in
• Magnification1x
• Clear Aperture24 mm
• Overall Length2.4 in
• Overall Width0.9 in
• Battery(1) CR2032
• EmitterEnclosed
• Reticle2 MOA Red Dot / 32 MOA Circle
• Reticle ColorRed
• Weight1.5 oz
• Illumination Settings12 DAYLIGHT / 3 NV
• Total Elevation Travel40 MOA
• Total Windage Travel80 MOA
• Run TimeUp to 50000 (Dot Only)