Pro-Shot Products

Pro Clean Suppressor Cleaning Kit

Effectively remove carbon fouling and build-up from your suppressor with the Pro-Shot Pro-Clean Suppressor Cleaning Kit. Designed for a quick and hassle-free cleaning processsimply soak scrub rinse dry and lubricate for optimal performance. Our biodegradable formula is non-toxic non-flammable and non-hazardous ensuring safe and eco-friendly cleaning. Engineered to be safe on all mil-spec and factory finishes including Stainless Steel Inconel and Titanium. Keep your suppressor in peak operating condition with Pro-Shots trusted American-made quality!

Kit Includes:

• Suppressor Soak Tube & Foam Mat
• 16 oz. Pro-Shot Pro-Clean Suppressor Cleaner
• Heavy-Duty Nylon Bristle Suppressor Adaptor Area Brush
• Suppressor Pick Tool for Easy Removal from Soak Tube
• Double-End Nylon Bristle Utility Brush
• (2) Pro-Gold Lubricant Packets

Instructions:

PRO-SHOT PRO-CLEAN SUPPRESSOR STANDARD CLEANING INSTRUCTIONS:

For Mil-Spec and Factory Finishes including Stainless Steel Inconel and Titanium.

1.Setup: Place the soak container into foam opening for added stability during the cleaning process.

2.Position Suppressor: Place the suppressor threaded end down in the cleaning tube.

3.Add Cleaner: Pour the Pro-Shot Suppressor Cleaner down the center of the suppressor opening and fill with cleaner until the cleaner is at least above the threaded end outside the suppressor in the container.

4.Soak Time:
oFor regular maintenance (aligned with firearm cleaning) soak for 1 hour.
oFor heavy fouling extend soaking to 8-12 hours.

5.Drain and Dry: Use the pick tool to remove the suppressor from the cleaner. Drain and thoroughly wipe it down.

6.Rinse: Rinse the suppressor with water and wipe down.

7.Remove Residue: Use compressed air or fire several rounds (supersonic is ideal) through the suppressor to clear out any remaining fouling.

8.Reassembly to Firearm: Use Pro-Gold Lubricant on suppressor adapter threads.

9.Dispose Properly: Dispose of the used cleaning fluid according to local regulations.

For disassemblable suppressors: Clean interior components with the provided brushes then reassemble. Recommended Cleaning Frequency: Every 5001000 rounds.

For Anodized Nitride Cerakote or Other Aftermarket Finishes:
*Submerging aftermarket finishes in soaking tube may affect the above aftermarket finishes.

IMPORTANT NOTE: Follow these Instructions for all above listed finishes!

1.Seal Suppressor: Insert a rubber or silicone plug into the exit end of the suppressor.
2.Fill with Cleaner: Fill the suppressor with Pro-Shot Suppressor Cleaner until full.
3.Soak: Place the suppressor upright in the cleaning tube. Soak for 624 hours.
4.Drain and Dry: Remove the plug drain and wipe down the suppressor.
5.Remove Residue: Use compressed air or fire several rounds (supersonic recommended) to expel loosened fouling.
6.Rinse: Rinse the suppressor with water and wipe down
7.Reassembly to Firearm: Use enclosed Pro Gold Lubricant on suppressor adapter threads.
8.Dispose Properly: Dispose of the used cleaning fluid according to local regulations.

For disassemblable suppressors: Clean the interior components with the provided brushes and reassemble. Recommended Cleaning Frequency: Every 5001000 rounds.